Jaw Coupling is light in weight,has high transmission torque,and can effectively correct installation deviations.
Body Material | Aluminum alloy |
Quality | 100%Tested |
Brand | JQT(Golden Bridge) |
Lead Time | 7-15days |
Jaw Coupling is mainly composed of aluminum alloy and polyurethane elastomer,which can buffer the vibration during transmission and absorb the impact caused by the uneven speed of the motor,effectively correcting the axial,radial and angular installation deviations.
Our company can provide setscrew jaw coupling,Clamp jaw coupling,ringfeder jaw coupling and other styles,and can process keyways and special hole diameters according to customer requirements.
1.Provide rectangular spline hole processing and involute spline hole processing,following the German standard DIN5480,5482.
2.Taper hole processing,divided into 1:5 taper hole 1:8 taper hole.
3.Keyway hole diameter 5-95mm.
Note:
When selecting a coupling,the first thing to consider is that the rated torque of the coupling needs to be greater than the rated torque of the motor used with the same equipment.
1. Lightweight, the moment of inertia small torque is high
2. Make the drive vibration get buffer and absorption by the motor's uneven operation generated by the impact
3. Can effectively correct the axial and radial and angular installation deviation
Model | Aperture(mm) | OD(mm) | L(mm) | Torque | Allowable speed | Tightening torque | ||||
D1 | D2 | (N.m) | ||||||||
Min. | Max. | Min. | Max. | Min | Max | |||||
JM14 | 3 | 7 | 3 | 7 | 14 | 22 | 1.2 | 2.4 | 28000 | 6.7 |
JM14C | 3 | 6 | 3 | 6 | 25000 | |||||
JM16 | 3 | 7 | 3 | 7 | 16 | 22 | 1.5 | 3.0 | 27000 | 9.0 |
JM16C | 3 | 7 | 3 | 7 | 24700 | |||||
JM20 | 4 | 10 | 4 | 10 | 20 | 30 | 3.0 | 6.0 | 26000 | 19.8 |
JM20C | 4 | 10 | 4 | 10 | 25500 | |||||
JDM20C | 4 | 10 | 4 | 10 | 20 | 45 | 1.5 | |||
JM25 | 4 | 12 | 4 | 12 | 25 | 34 | 6.0 | 12.0 | 19000 | 37.0 |
JM25C | 4 | 12 | 4 | 12 | 17000 | |||||
JDM25C | 4 | 12 | 4 | 12 | 25 | 52 | 1.5 | |||
JM30 | 5 | 16 | 5 | 16 | 30 | 35 | 8.0 | 16.0 | 15200 | 50.0 |
JM30C | 5 | 16 | 5 | 16 | 12600 | |||||
JM30T | 6 | 14 | 6 | 14 | 30 | 50 | 16.0 | 32.0 | 25000 | 1.5 |
JDM30C | 5 | 16 | 5 | 16 | 30 | 56 | 1.5 | |||
JM40 | 6 | 24 | 6 | 24 | 40 | 66 | 10.5 | 21.0 | 10000 | 1.5 |
JM40C | 6 | 24 | 6 | 24 | 9000 | 4.0 | ||||
JM40T | 10 | 20 | 10 | 20 | 40 | 66 | 21.0 | 42.0 | 16500 | 2.5 |
JDM40C | 8 | 24 | 8 | 24 | 40 | 92 | 8.0 | |||
JM55 | 8 | 28 | 8 | 28 | 55 | 78 | 37.5 | 75.0 | 8200 | 4.0 |
JM55C | 8 | 28 | 8 | 28 | 6500 | 8.0 | ||||
JM55T | 11 | 28 | 11 | 28 | 55 | 78 | 75.0 | 150.0 | 12200 | 4.0 |
JDM55C | 10 | 28 | 10 | 28 | 55 | 112 | 8.0 | |||
JM65 | 10 | 38 | 10 | 38 | 65 | 90 | 100.0 | 200.0 | 6300 | 15.0 |
JM65C | 10 | 38 | 10 | 38 | 5260 | 16.0 | ||||
JM65T | 15 | 38 | 15 | 38 | 65 | 90 | 200.0 | 400.0 | 10500 | 4.0 |
JDM65C | 12 | 38 | 12 | 38 | 65 | 128 | 16.0 | |||
JM80 | 12 | 45 | 12 | 45 | 80 | 114 | 202.5 | 405.0 | 5800 | 15.0 |
JM80C | 12 | 45 | 12 | 45 | 4600 | 16.0 | ||||
JM80T | 20 | 45 | 20 | 45 | 80 | 114 | 405.0 | 810.0 | 8650 | 8.0 |
JDM80C | 16 | 45 | 16 | 45 | 80 | 158 | 16.0 | |||
JM95 | 14 | 55 | 14 | 55 | 95 | 126 | 225.0 | 450.0 | 4000 | 15.0 |
JM95C | 14 | 55 | 14 | 55 | 3800 | 40.0 | ||||
JM105 | 15 | 62 | 15 | 62 | 105 | 140 | 262.5 | 525.0 | 3600 | 15.0 |
JM105C | 15 | 62 | 15 | 62 | 3300 | 115.0 | ||||
JM120 | 20 | 74 | 20 | 74 | 120 | 160 | 342.5 | 685.0 | 3200 | 32.0 |
JM120C | 20 | 74 | 20 | 74 | 2800 | 115.0 | ||||
JM135 | 22 | 80 | 22 | 80 | 135 | 185 | 470.0 | 940.0 | 3000 | 32.0 |
JM135C | 22 | 80 | 22 | 80 | 2500 | 115.0 | ||||
State | Max OD:135mm Max ID:80mm |
Model | Aperture(mm) | OD(mm) | L(mm) | Torque | |||||
D1 | D2 | (N.m) | |||||||
Min. | Max. | Min. | Max. | Min | Max | ||||
JM14 | 3 | 7 | 3 | 7 | 14 | 22 | 1.2 | 2.4 | |
JM14C | 3 | 6 | 3 | 6 | |||||
JM16 | 3 | 7 | 3 | 7 | 16 | 22 | 1.5 | 3.0 | |
JM16C | 3 | 7 | 3 | 7 | |||||
JM20 | 4 | 10 | 4 | 10 | 20 | 30 | 3.0 | 6.0 | |
JM20C | 4 | 10 | 4 | 10 | |||||
JM25 | 4 | 12 | 4 | 12 | 25 | 34 | 6.0 | 12.0 | |
JM25C | 4 | 12 | 4 | 12 | |||||
JM30 | 5 | 16 | 5 | 16 | 30 | 35 | 8.0 | 16.0 | |
JM30C | 5 | 16 | 5 | 16 | |||||
JM40 | 6 | 24 | 6 | 24 | 40 | 66 | 10.5 | 21.0 | |
JM40C | 6 | 24 | 6 | 24 | |||||
JM55 | 8 | 28 | 8 | 28 | 55 | 78 | 37.5 | 75.0 | |
JM55C | 8 | 28 | 8 | 28 | |||||
JM65 | 10 | 38 | 10 | 38 | 65 | 90 | 100.0 | 200.0 | |
JM65C | 10 | 38 | 10 | 38 | |||||
JM80 | 12 | 45 | 12 | 45 | 80 | 114 | 202.5 | 405.0 | |
JM80C | 12 | 45 | 12 | 45 | |||||
JM95 | 14 | 55 | 14 | 55 | 95 | 126 | 225.0 | 450.0 | |
JM95C | 14 | 55 | 14 | 55 | |||||
JM105 | 15 | 62 | 15 | 62 | 105 | 140 | 262.5 | 525.0 | |
JM105C | 15 | 62 | 15 | 62 | |||||
JM120 | 20 | 74 | 20 | 74 | 120 | 160 | 342.5 | 685.0 | |
JM120C | 20 | 74 | 20 | 74 | |||||
JM135 | 22 | 80 | 22 | 80 | 135 | 185 | 470.0 | 940.0 | |
JM135C | 22 | 80 | 22 | 80 | |||||
State | Max OD:135mm Max ID:80mm |
1. PE bag independent packaging.
2. Support neutral packaging.
3. Logo customization.
Jinan Golden Bridge Precision Machinery Co., Ltd was established in 2007. Our factory is in Dezhou, and our office is in Jinan, both in Shandong Province. We support overseas customers to conduct factory inspections at any time.
Since its establishment, our company has been committed to developing and innovating the national industry. We adhere to the enterprise spirit of "efficient, pragmatic, rigorous, and innovative" and are committed to creating precision machinery and equipment. We have had dozens of imported machining centers, CNC lathes, drilling centers, CNC cutting, and other advanced machining equipment. We have been focusing on researching, developing, producing, and selling precision parts and vacuum equipment.
Our company has a clear corporate system, including the general manager's office, finance department, technical department, production department, sales department, after-sales department and human resources department, The total number of people reached 63. Our company has import and export rights, and the Foreign Trade Department was established in 2009. Our products are not only adopted by major domestic enterprises, but also exported to Europe, America, Africa, Southeast Asia, and other regions, and are deeply welcomed by clients. Annual turnover is 10 million US dollars. We have dozens of product patent certificates and various CE certificates.